Becoming an electrician in El Centro, CA, typically begins with an apprenticeship, combining hands-on experience with classroom learning, allowing individuals to earn while they learn. Apprenticeships last about four to five years, requiring many hours of training under licensed professionals. The U.S. Bureau of Labor Statistics reports 762,600 electricians nationwide, with an average weekly wage of $1,650 in El Centro, CA. Trade schools, unions, and platforms like Gild help aspiring electricians find apprenticeship opportunities, leading to a career with strong earning potential—often exceeding $56,000 annually for experienced professionals.
PRIMARY FUNCTION Under general supervision, performs professional engineering work related to the district’s electric distribution engineering and planning functions. Performs other duties as assigned. DISTINGUISHING CHARACTERISTICS The Engineer, Assistant is distinguished from the Engineer in that incumbents do not have a professional registration, and perform their duties under the supervision of an Engineer. Progression to the next level will depend on obtaining required experience and/or certification and approval from management. May be consulted on a 24-hour basis regarding specific engineering problems which may be of an emergency nature, or may be required to supervise emergency repair work. ESSENTIAL DUTIES AND RESPONSIBILITIES The examples of essential functions listed below are representative but not necessarily exhaustive or descriptive and incumbent may be assigned other related functions not listed herein if such functions are a logical assignment for the position. 1. Assists with designing electrical components and structures for a variety of engineering project as re-builds, upgrades and new line extension to improve the distribution system performance; and participates in preparation of cost estimates, bill of materials, working plans and construction notes. 2. Assists in reviewing marginal system operational characteristics and recommends distribution equipment to reduce or eliminate impact on customers. 3. Assists with research for annual budget regarding capital projects; assist in preparing preliminary one, three and ten year studies regarding distribution and substation capacities; prepares per unit costs and project estimations for distribution projects overhead and underground. 4. Assists with preparation of major work authorization packages for distribution projects, prepares cost breakdowns, SAP reports and participates preparing project scope, cost breakdowns, power point presentations and deliverables. 5. Reviews, assists and recommends course of action to resolve distribution system operating problems in coordination with district personnel. 6. Remains current on district, federal, state and local safety codes and regulations, and insures district staff complies with the codes and regulations. 7. Assists engineers in researching and evaluating technical problems and applies engineering principles and theories in investigations to develop and improve power systems. 8. Keeps supervisor current on projects and prepares reports. MARGINAL DUTIES AND RESPONSIBILITIES 1. Assists with preparation of specifications for the design of new or modification of existing systems and equipment. 2. Assists with coordination between contractors, suppliers and district resources during multiple project phases; reviews work design, and fabrication of both internal and external resources to ensure specifications and standards are in compliance. 3. Assists in reviewing and developing of revised or new district distribution system design criteria. 4. Assists in preparing and recommending annual budget, three and ten-year budget. 5. Reviews trade periodicals and participates in trade and/or technical seminars to remain current on innovations and industry trends; informs staff of information. 6. Prepares specification for systems and equipment. 7. Performs other duties as assigned. SUPERVISORY RESPONSIBILITIES - None MINIMUM QUALIFICATION To perform the job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Education and Experience • Bachelor’s degree with a major in electrical engineering or related field or Associate’s degree with a major in electrical engineering and four years of distribution engineering experience and Engineering-In-Training Certificate is required. • Licensing: A valid driver’s license issued by the State of California, Department of Motor Vehicles is required. KNOWLEDGE, SKILLS AND ABILITIES Knowledge Principles of electrical engineering; engineering, computer science and mathematical concepts; legal descriptions; manual and computer-aided drafting techniques and procedures; personal computer and appropriate software applications including CAD, Power Flow and transient stability software, communication, internet, word, excel, and access; energy management system real-time data retrieval; and safe work practices. Skills/Abilities • Conceptualize engineering problems and design effective solutions; • Read, analyze, and interpret system studies, financial reports, performance evaluations, policy and procedure, governmental rules and regulations and legal documents; • Exercise sound judgment in both routine and emergency situations; maintain effective relations with employees and public and/or private agency representatives; apply complex mathematical concepts; write clear, concise reports and studies; set priorities; • Understand safety rules and regulations and work safely; be prompt and regular in attendance; and work courteously and cooperatively with employees, public and/or private agency representatives, vendor and manufacturer representatives, regulatory agency representative and municipal representatives. Tools and Equipment Used General office equipment, computer, calculator, electrical and mechanical test equipment, analytical equipment, diagnostic equipment, manuals, reference books, telephone, copy machine, fax machine and vehicle. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee frequently works in a well lighted office environment with climatically controlled temperature; the employee occasionally works in outside weather conditions; near moving mechanical parts; exposed to fumes, dust, and airborne particles; to heat including direct sunlight.
See More Details >>About the position Helix Electric has an immediate need for a dynamic State Certified Journeyman Electrician. The successful candidate will join a production-driven team, focusing on electrical installations and troubleshooting in various commercial settings. Helix Electric, Inc. is recognized as one of the most successful open-shop electrical contracting companies in the nation, with a diverse portfolio that includes design-build services, industrial, commercial, mixed-use multi-family developments, as well as government, institutional, communications, and utilities projects. The company prides itself on its world-class technical expertise and maintains vital, long-term relationships with general contractors, utility companies, and power users, ensuring a high level of credibility and trust in the services provided. In this role, the Journeyman Electrician will be responsible for the assembly, installation, maintenance, and testing of electrical equipment and wiring systems. This includes preparing work areas for the installation of equipment, installing electrical components, and connecting wiring and equipment according to code and job specifications. The electrician will operate various tools and equipment, ensuring they are trained and certified to do so. Responsibilities also include reading blueprints and electrical drawings, verifying dimensions and alignments, and securing equipment after use. A proven track record of delivering safe projects on schedule and within budget is essential, along with excellent knowledge of building codes and strong communication skills. Responsibilities • Perform electrical installations and troubleshooting in commercial settings. , • Prepare work area for installation of equipment. , • Install electrical components as per specifications. , • Connect wiring and equipment according to code and job specifications. , • Operate equipment only if trained and certified to do so. , • Set up and operate tools such as hydraulic benders, power threaders, power pullers, and cable vacuum systems. , • Read blueprints and electrical drawings to install as specified. , • Verify dimensions, alignments, and clearances per drawings or plans. , • Secure and lock up equipment after use. Requirements • State Journeyman Electrician Certification is a requirement. , • Proven track record of delivering safe projects on schedule and within budget. , • Excellent working knowledge of the Building Codes. , • Strong communication and interpersonal skills. Nice-to-haves Benefits
See More Details >>You will serve as a Electrical Engineer in the Public Works Department of Naval Facilities Engineering Systems Command (NAVFAC) Atlantic. • *Above salary does not include locality. Locality adjustment will be determined by duty station location once a selection has been made.** This position is a 100% TDY position to Camp Lemonnier, Djibouti, Africa. This is a full-time temporary assignment not to exceed 1 year. This position may be filled as a temporary promotion or temporary reassignment.Qualifications:In addition to the Basic Education Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector performing the following duties: 1) providing subject matter expertise on electrical engineering issues; 2) preparing and/or collaborating on the development of design drawings, project specifications and cost estimates; 3) coordinating with and/or directing personnel or contractors to complete complex engineering and construction projects; and 4) analyze engineering work to provide recommendations for solutions to complex problems. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Additional Information: Work Environment: Camp Lemonnier, Djibouti, Africa is located in a harsh environmental setting with adverse weather conditions for many months of the year (excessive heat, humidity, and rain) and working in areas populated by poisonous snakes, plants, and/or insects, and contagious diseases and poor air quality, chemical handling areas, and damp and unheated spaces. The work may require extensive work shifts of 12-16 hours a day and more than a 5 day workweek. Generally, indoor work location has power, water, heating and air conditioning, although outages should be expected. The incumbent will be required to live on the camp, where living quarters are a container living unit (CLU), which may be very cramped with the requirement to share bathroom facilities. Initial living quarters may be a tent. Fatigue may occur from long work hours and uncomfortable living conditions. The position may be required to provide immediate contingency support requiring a physical and immunizations deemed necessary for the environment in which this support is provided. Incumbent is entitled to 25% Post Differential pay. Potential benefits for working in Djibouti: Ability to gain international work experience. Professional development by working in an area at the forefront of construction and community growth. High potential for overtime pay. Local Market Supplement (based on parent command location) Imminent Danger Pay - $225/month (first 42 days) Post Differential Allowance - currently 25% of base pay (beginning day 43+)Education:Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position. OR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html. OR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above) OR Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.Employment Type: FULL_TIME
See More Details >>